Wirepath WPS-700-DOM-A-WH Manual de instalación descargar pdf (Pagina 25)

WPS-700-DOM-A Installation Manual

TheSENSE-UPfunctioncannotbeactivated

 •CheckifSHUTTERissettoOFForothervalue.SENSE-UP

function is only available when SHUTTER is set to AUTO.

TheDAY/NIGHTmenucannotbesettoAUTO

 •CheckifAGCissettoOFF.WhenAGCisOFF,AUTO 

cannot be activated.

The3D-DNRfunctioncannotbesettoON

 •CheckifAGCissettoOFF.WhenAGCisOFF,3D-DNR

cannot be activated.

The color of the picture is not correct

 •CheckWhiteBalanceandColor(Red/Blue)settings.

 •Resetthecameratofactorydefaultsettings.

Screenickerscontinuously

 •Checkthecameralocationtomakesureitisnotpointing 

directly towards the sun or bright light source.

 •Checkiftheickerlesscontrolissetcorrectly;propersettings 

  shouldreectrequiredrefreshrates.

 •Resetthecameratofactorydefaultsettings.

RS-485 communication failure

 •CheckwhethertheRS-485polarityisconnectedcorrectlyto

the RS-485 port.

 •ChecktheCameraIDsettingandmakesurethereisnot

more than one device with the same ID on the RS485 network.

 •CheckthattheProtocolandBaudRateforalldevicesareset

  tothesameconguration.

•Warning:ConictingsettingsoftheProtocolandBaudRate 

  amongdevicesconnectedtotheRS485networkcouldresult

  inabnormaloperationofthecamera.EnsurethattheProtocol

  andBaudRateforalldevisesaresettothesameconguration.

1 2 ... 20 21 22 23 24 25 26 27 28

Sin comentarios

Wirepath WPS-700-DOM-A-WH Manual de instalación Pagina 25