Wirepath WPS-700-DOM-A-BL Manual de instalación descargar pdf (Pagina 15)

WPS-565-DOM-A Installation Manual

6.4. OSD MENU SETTINGS

6.4.1. LENS Menu

The amount of light entering the camera lens is controlled by the size of the

aperture, (called IRIS in SETUP menu).

SETUP

LENS DC

• The default DC setting is recommended when lighting levels vary regularly.

• For conditions with xed, low-level lighting, the MANUAL setting may be ideal.

Both settings offer additional setup options for ne tuning:

• Set the lens mode on the main setup screen. Move the joystick left and right to

select DC (Auto-IRIS), or MANUAL mode and enter each setting’s sub-menu.

6.4.1.1. DC Mode

DC mode is the recommended setting for outdoor locations and environments

with varying light conditions. In DC mode, the camera adjusts the aperture of the

lens automatically based on the lighting conditions of the environment.

DC LENS

BRIGHTNESS

|||||||||||||

037

IRIS SPEED

|||||||||||||||

000

RETURN RET

• Brightness — Set level from 1(dark) to 255(bright). Too much brightness will

cause washing out. Too little will leave the picture too dim to view clearly.

• Iris Speed — Sets the reaction speed of iris changes related to light changes.

Leave the setting at 0 unless there is light strobing regularly in the scene

causing excessive variation in brightness.

6.4.1.2. MANUAL Mode

In this mode the aperture is set fully open and light level is not controllable.

This setting is only recommended for an environment with consistent lighting

conditions.

MANU. LENS

BRIGHTNESS

|||||||||||||

037

RETURN RET

• Brightness — Set level from 1 (dark) to 255 (bright). Too much brightness will

cause washing out. Too little will leave the picture too dim to view clearly.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Sin comentarios

Wirepath WPS-700-DOM-A-BL Manual de instalación Pagina 15