Wirepath WPS-700-DOM-A-BL Manual de instalación descargar pdf (Pagina 18)

WPS-565-DOM-A Installation Manual

6.4.4. BACKLIGHT Menu

Back Light Compensation (BLC, default) claries objects in front of bright light. For

example, in a scene with lighting facing the camera, if a person walks toward a

normal camera, they will appear as a silhouette, but BLC will adjust contrast for

more detail. BLC is ideal where the eld of view is focused close to the camera.

High Light Compensation (HLC) blocks bright light from causing white-out. For

example, with HLC, car headlights will appear to be blacked out and surrounding

light levels will be balanced enough to reveal details that would normally be

washed out. HLC is ideal for a wide eld of view focused far from the camera.

Use MASK SKIP to dene where BLC/HLC is active; for example, where bright light

only disrupts the top or bottom of a scene.

• Move the joystick left or right to select HLC or BLC and enter its sub-menu.

6.4.4.1. BLC (Back Light Compensation) Setup

BLC

AREA SEL. AREA1

AREA STATE ON

GAIN

||||||||||

|||||

165

HEIGHT

||||||||||

|||||

010

WIDTH

||||||||||||||

004

LEFT/RIGHT

||||||||||||||

005

TOP/BOTTOM

|||||||||||||

005

RETURN RET

• AREA SEL — Select AREA1 or AREA2 to adjust BLC values for that area.

• AREA STATE — Set BLC to OFF or ON in each area.

• GAIN — Adjust the level of BLC from 0~255.

• Set the BLC area by adjusting HEIGHT, WIDTH, LEFT/RIGHT, and TOP/BOTTOM.

6.4.4.2. HLC (High Light Compensation) Setup

HLC

LEVEL

||||||||||

|||||

150

MODE NIGHT ONLY

MASK SKIP OFF

RETURN RET

• LEVEL — Adjust from 0 to 255. The larger the value, the more the camera will

black out light sources.

• MODE — Set to ALL DAY or NIGHT ONLY mode. NIGHT ONLY mode turns off HLC

unless the color mode is in black and white (BW).

• MASK SKIP — Turn ON and enter the sub-menu (not pictured) to size and position

the square MASK SKIP area.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Comentarios a estos manuales

Sin comentarios

Wirepath WPS-700-DOM-A-BL Manual de instalación Pagina 18

Comentarios a estos manuales