Wirepath WPS-700-DOM-A-BL Manual de instalación descargar pdf (Pagina 19)

WPS-565-DOM-A Installation Manual

6.4.5. DAY & NIGHT Menu

The camera sensor has DAY (color) and NIGHT(black and white) mode. Use this

menu to set up the mode, how it is switched and also IR levels.

• Move the joystick left or right to select a mode and enter its sub-menu (if

applicable). Not all menus are displayed due to similarities in settings.

6.4.5.1. D&N EXT (External Sensor)

By default (D&N EXT), the color mode is set based on a light sensor on the front of

the camera. Recommended for most applications.

• D→NDELAY: Set delay for switching day (COLOR) to night (B/W) mode. Set from

0 to 30 seconds. Increase if night mode switches on too quickly.

• N→DDELAY:Set delay from Night to Day mode (opposite of above). Set from 0

to 30 seconds. Increase if day mode switches on too quickly.

6.4.5.2. D&N COLOR Mode

Lock the camera in COLOR (daylight) mode. IR will NOT activate in this mode, so

the ambient lighting level must be sufcient for viewing.

6.4.5.3. B/W Setting

Lock the camera in B/W (night time) mode. IR intensity may also be set.

• BURST — Turn ON and image is converted to a grey image containing the color

signal. OFF sends a true B/W image containing no color signal.

• IR SMART — Prevents over-exposure by reducing IR LED intensity when objects are

too close to the camera. Scroll left or right to turn ON or OFF.

• IR LEVEL — Scroll left or right to set the IR output level to HIGH or LOW.

6.4.5.4. D&N AUTO Setting

In this mode, the camera uses the light entering the sensor to determine daytime

(COLOR) or nighttime (BW) mode.

D&N AUTO

DN LEVEL

|||||

||||||||||

080

DN DELAY

5 SEC

ND LEVEL

|||||||||||||||

004

ND DELAY

5 SEC

RETURN RET

• D > N LEVEL — Set the light level required to switch from COLOR to B/W mode.

Increase if the camera switches to B/W mode too early at night.

• D > N DELAY — Set the delay for switching to B/W mode. Increase if the camera

uctuates between COLOR and B/W mode early at night.

• N > D LEVEL — Set the light level required to switch from B/W to COLOR mode.

Increase if the camera switches to COLOR mode too late in the morning.

• N > D DELAY — Set the delay for switching to COLOR mode. Increase if the

camera uctuates between B/W and COLOR mode early in the morning.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Comentarios a estos manuales

Sin comentarios

Wirepath WPS-700-DOM-A-BL Manual de instalación Pagina 19

Comentarios a estos manuales